Loading...

Can you store IG100 at 165 bar not 200

By |2021-12-20T10:54:01+00:00June 4th, 2014|Ask The Expert|

Paul recently wrote to ask with the following question, “Can you store IG100 at 165 bar not 200”? Here's our answer: IG100 as well as IG55 and IG541 were all originally designed around 150 bar systems, but as systems have developed and to reduce the amount of cylinders required (the higher the pressure the more

Please advise when the IG55 system is designed for 200 bar & when for 300 bar

By |2021-12-03T11:31:32+00:00September 27th, 2012|Ask The Expert|

Our experts were recently asked the following question: "Please advise when the IG55 system is designed for 200 bar & when for 300bar" This is our answer: It is down to each individual project but usually we would use 300bar on most projects as this would use less cylinders and therefore this would usually be

Is a fire suppression system a legal requirement?

By |2025-05-29T19:12:14+00:00January 16th, 2012|Ask The Expert|

Graeme recently asked the question "I am building a restaurant. Is a fire suppression system a legal requirement?" to our Ask The Expert on www.activefire-uk.com Our expert answered as follows: There is no legal requirement in the UK for a Fire Suppression System in a kitchen but you must carry out a Fire Risk

Fire Suppression Systems – Smoke Exhaust Fans Interfacing

By |2025-05-29T17:18:55+00:00January 13th, 2012|Ask The Expert|

Rami recently asked the question "Can I use the sounder circuit to trigger smoke exhaust fans via relay?" to our Ask The Expert on www.activefire-uk.com Our expert answered as follows: Unfortunately, I can't see how you could do this at the correct time as you would only need to operate the exhaust fans after

BMS points list and schedule of operation for the IG55 Gas Suppression

By |2020-07-11T16:30:22+00:00November 3rd, 2011|News|

We were recently asked for a list of items that you could connect to a Building Management System (BMS) to monitor a Fire Suppression and Detection System. Here is the answer we e-mailed, if you have any questions please do not hesitate to post them below or contact us. Q: Thank you for your

Go to Top